Marine Engine Control Cable
Engine control cable- C8, 3300S
Use for inboard, sterndrive and outboard engines cable
- Push pull cable.
- The outer is long lay conduit, OD is 8.7 mm, 18 wires, and coating material is HDPE in red.
- Core wire OD is 3 mm, material is galvanize steel with PA6 coating.
- Cable end fitting material is stainless steel for anti-corrosion.
- End thread SPEC is 3/16-32 UNF and protected by PVC protector.
- The core cable applied with sufficient lubricant for good efficiency.
- Various lengths are available from 5FT to 30FT or longer.
Engine control cable- C48, 4300BC
Use for inboard, sterndrive and outboard engines cable
- Push pull cable.
- The outer is long lay conduit, OD is 11 mm, 19 wires, and coating material is HDPE in red.
- Core wire OD is 4.3 mm, material is galvanize steel with PA6 coating.
- Cable end fitting material is stainless steel for anti-corrosion.
- End thread SPEC is 1/4-28UNF and protected by PVC protector.
- The core cable applied with sufficient lubricant for good efficiency.
- Various lengths are available from 5FT to 30FT or longer.
Engine control cable-C22 , 4300C
Use for inboard, sterndrive and outboard engines cable
- Push pull cable.
- The outer is long lay conduit, OD is 11 mm, 19 wires, and coating material is HDPE in red.
- Core wire OD is 4.3 mm, material is galvanize steel with PA6 coating.
- Cable end fitting material is stainless steel and brass plating with Ni for anti-corrosion.
- End thread SPEC is 1/4-28UNF and protected by PVC protector.
- The core cable applied with sufficient lubricant for good efficiency.
- Various lengths are available from 5FT to 30FT or longer.
Engine control cable- C5
Use for inboard, sterndrive and outboard engines cable
- Push pull cable.
- The outer is long lay conduit, OD is 8.3 mm, 23 wires, and coating material is PP in blue.
- Core wire OD is 3.2 mm, material is SUS304 steel with PBT coating.
- Cable end fitting material is stainless steel and brass plating with Ni for anti-corrosion.
- The material of plastic component is PA66.
- The core cable applied with sufficient lubricant for good efficiency.
- Various lengths are available from 5FT to 30FT or longer.
Engine control cable- C14
Use for inboard, sterndrive and outboard engines cable
- Push pull cable.
- The outer is long lay conduit, OD is 8.3 mm, 23 wires, and coating material is PP in blue.
- Core wire OD is 3.2 mm, material is SUS304 steel with PBT coating.
- Cable end fitting material is stainless steel and brass plating with Ni for anti-corrosion.
- The material of plastic component is PA66.
- The core cable applied with sufficient lubricant for good efficiency.
- Various lengths are available from 5FT to 30FT or longer.
Engine control cable- C36 (GEN2)
Use for inboard, sterndrive and outboard engines cable
- Push pull cable.
- The outer is long lay conduit, OD is 8.3 mm, 23 wires, and coating material is PP in blue.
- Core wire OD is 3.2 mm, material is SUS304 steel with PBT coating.
- Cable end fitting material is stainless steel and brass plating with Ni for anti-corrosion.
- The material of plastic component is PA66.
- The core cable applied with sufficient lubricant for good efficiency.
- The core cable applied with sufficient lubricant for good efficiency.
